If you’re like most people, you probably don’t want to call a plumber every time something goes wrong with your plumbing. And while you should definitely be aware of the top plumbing repairs you shouldn’t DIY ever, we’ve put together this list of DIY plumbing hacks that will help you solve common problems without spending a fortune!
In this blog post, you’ll learn how to unclog a sink using baking soda and vinegar, fix a leaky faucet using plumber’s tape, snake a drain using a plumbing snake, and many other helpful tips. So the next time something goes wrong in your bathroom or kitchen, try one of these tricks before calling the professionals!
- How to unclog a sink using baking soda and vinegar
If your sink is starting to back up, don’t reach for the toxic drain cleaner right away. Instead, try this simple and natural remedy! Just pour a cup of baking soda down the drain, followed by a cup of vinegar. Let the mixture sit for 15 minutes, then flush with hot water. This should help to break up any clogs and clear your drain!
If the clog is still stubborn, you can try using a plumbing snake. Just insert the snake into the drain and turn it until you feel resistance. This should help to break up any remaining clogs so that water can flow freely down your drain!
Of course, if neither of these methods works, it’s time to call a professional. But at least you’ll know that you tried!
- How to fix a leaky faucet using plumber’s tape
If you have a leaky faucet, try using some plumber’s tape. First, turn off the water to your sink. Then, remove the handle and use a wrench to loosen the packing nut. Next, apply plumber’s tape around the stem threads before screwing on the handle. Finally, turn the water back on and check for leaks. If there are still leaks, you may need to replace the washer or O-ring.
- How to snake a drain using a plumbing snake
If your drain is starting to back up, you may need to snake it. This simple tool can help to break up any clogs so that water can flow freely down your drain! Just insert the snake into the drain and turn it until you feel resistance. This should help to break up any remaining clogs and allow water to flow freely down your drain again.
- How to install a new faucet in minutes
If you need to install a new faucet, don’t worry – it’s easy! Just turn off the water to your sink and use a wrench to loosen the supply lines. Next, remove the old faucet and clean up any old plumber’s putty. Then, apply plumber’s putty to the base of the new faucet and install it according to the manufacturer’s instructions. Finally, turn the water back on and check for leaks.
- How to repair water damage in under an hour
If you have water damage, it’s important to act fast! First, turn off the water to your home and remove any wet items from the affected area. Then, use a wet/dry vacuum to remove as much water as possible. Next, use a fan or dehumidifier to dry out the area, and place some buckets around to catch any drips. Finally, call a professional to repair any structural damage.
We hope you found these tips helpful! Remember, the next time something goes wrong with your plumbing, try one of these DIY hacks before calling a professional. Good luck!